Product ID:THERMOFIT S-1009 ADHESIVE PART A
MSDS Date:01/01/1991
FSC:8040
NIIN:00-181-7201
Kit Part:Y
MSDS Number: CDVFQ

Emergency Phone: 415-361-4907

Info Phone: 415-361-4907

Preparer: ARLENE KLONOFF

Cage: 06090

Telephone: 415-361-4907

Cage: 06090

EPICHLOROHYDRIN/BISPHENOL A EPOXY RESIN

CAS: 25068-38-6

RTECS: SL6480000

SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

LD50 LC50 Mixture:ORAL LD50 (RAT) 11.4 G/KG (EPOXY) *
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO EYES AND SKIN. LOW ORDER
OF ACUTE ORAL TOXICITY. REPEATED OR PROLONGED CONTACT MAY PRODUCE
SKIN SENSITIZATION OR OTHER ALLERGIC RESPONSES IN SUSCEPTIBLE
INDIVIDUALS.
Effects of Overexposure:SKIN IRRITATION, EYE IRRITATION, SKIN
SENSITIZATION

First Aid:IN CASE OF EYE CONTACT, FLUSH WITH WATER FOR AT LEAST 15
MINUTES. SEEK MEDICAL ATTENTION. SKIN: WASH WITH MILD SOAP AND
WATER. INGESTION: DO NOT INDUCE VOMITING. IF PATIENT HAS INGESTED A
SIGNIFICANT QUANTITY, CONSIDER DILUTION WITH WATER AND SEEK
MEDICAL AID. NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.
INHALATION: MOVE TO FRESH AIR. TREAT SYMPTOMATICALLY.

Flash Point:480F,249C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS IN ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY BE EVOLVED IN A FIRE. THE
CURING PROCESS OF THIS ADHESIVE IS EXOTHERMIC.

Spill Release Procedures:USE PERSONAL PROTECTION. CONTAIN SPILL WITH
INERT ABSORBENT. STOP AT SOURCE. TRANSFER CONTAMINATED ABSORBENT TO
CONTAINER AND HANDLE AS HAZARDOUS WASTE.

Handling and Storage Precautions:CURING OF ADHESIVE (PARTS A & B)
SHOULD BE DONE IN A WELL-VENTILATED AREA. THE CURING PROCESS IS
EXOTHREMIC.
Other Precautions:PREVENT CONTACT WITH SKIN AND EYES. WASH HANDS
THOROUGHLY AFTER USE. USE ONLY WITH ADEQUATE VENTILATION.

Respiratory Protection:IF VENTILATION IS INADEQUATE TO CONTROL VAPORS,
NIOSH/MSHA-APPROVED AIR-PURIFYING RESPIRATORS ARE RECOMMENDED.
Ventilation:IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE, ENSURE
ADEQUATE VENTILATION DURING APPLICATION.
Protective Gloves:IMPERVIOUS GLOVES TO PREVENT CONTACT
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EMERGENCY EYEWASH, SHOWER
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
Supplemental Safety and Health
NK *ACUTE DERMAL LD50 (RABBIT) >20 ML/KG (EPOXY)

Vapor Pres:NA
Spec Gravity:> 1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS, PURPLE LIQUID WITH SLIGHT ODOR

Stability Indicator/Materials to Avoid:YES
ACIDS, BASES OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP PARTS A AND B SEPARATED UNTIL READY
FOR USE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ACIDS, ALDEHYDES, HYDROGEN SULFIDE, OXIDES OF SULFUR AND NITROGEN
COMPOUNDS.
Conditions to Avoid Polymerization:WILL REACT EXOTHERMICALLY WHEN
CURING.

Waste Disposal Methods:MUST BE DISPOSED OF AS HAZARDOUS WASTE IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL LAWS. DUMPING INTO SEWER,
ONTO THE GROUND, OR INTO ANY BODY OF WATER IS PROHIBITED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.